Search results for 'hose covers'

Deep 6 Eddy Fins $229.95 all sizes and colors Learn More

The Hollis Butt Plate allows divers who wish to transform their existing harness and buoyancy compensating wing into a rig capable of side-mounting tanks. Locked-tight into place using stainless steel assembly screws through slots on the back-plate. When side-mounting stage tanks or re-breather bailout bottles, butt-plate rails can be difficult to access if back-mounted gear covers them-up. Problem solved with Hollis Butt Plate. Its rectangular shape places tank attachment points at the edge of the diver's body, while outrigger hardware is easy to find due to its orientation facing outwards on the plate. The Butt-Plate is made of reinforced nylon to provide the proper amount of rigidity to hold tanks in position and eliminate sag. Two stainless steel handles are used for tank attachment. Included with the Butt-Plate are two stainless steel assembly screws for securing Butt-Plate to a back-plate. The Butt-Plate is equipped with 4 rust and corrosion resistant stainless steel grommets. Learn More

This wireless transmitter screws in to the high-pressure (HP) port of a first stage regulator and can communicate with the dive computer to allow them to display the cylinder gas pressure without the use of the typical HP hose. Multi transmitter capabilities, LED Status Indicator Rated Air Pressure 300 bar/ Depth 200msw User replaceable CR2 Battery Compatible with pre-exisiting & current Shearwater AI computers

Learn More

Rebreather Hose Protectors. Comes as a pair. Can be rolled under to fit short rebreather hoses. The Rebreather Hose Protectors provide the puncture and abrasion resistance.

Learn More

PSAI CCR Cave Diving Manual Learn More

Comes With: Stealth 2.0 Tec Dive Rite XT 1st and 2nd Stage 30" Short Hose 84" Long Hose 2 - 1.5" SPG's 2 - 6" HP Hoses Free CaveAdventurers Reg Bag Learn More

Comes with: Katana 2 Dive Rite XT 1st and 2nd Stage or Deep 6 1st/2nd 30" Short Hose 84" Long Hose 2 - 1.5" SPG 2- 6" HP Hoses Learn More

Tried and true EPDM hose retainers with modern twist.

Learn More

The Dive Rite Oxygen Decompression Regulator is a compact, lightweight option for a deco regulator. Assembled in a clean room using all oxygen compatible materials and lubricants, this shallow water deco regulator can be used with higher concentrations of oxygen without the need for additional preparation.

An unbalanced piston DIN first stage gives ideal performance for a shallow water regulator. An OPV on the first stage provides an additional margin of safety in the event of a first stage failure. A single HP port is used for a 1" diameter button guage.

The XT2 second stage is a pneumatically balanced second stage with Venturi assist to provide a consistent gas pressure delivery for smooth inhalation. User adjustability on the second stage lets the divers tune the inhalation setting to match personal preference. An orthodontic mouthpiece reduces jaw fatigue on longer deco obligations. A 40" green low pressure hose and green faceplate on the second stage come standard to indicate oxygen use.

Note: The Oxygen Deco Regulator is ONLY intended for use as a deco regulator. Do not attempt to use for a stage bottle/travel regulator.

Note: The Oxygen Deco Regulator is not intended for use deeper than 50 ft (15m) on appropriate gas mix.

Learn More

Hollis C 60 LX Series Wing Learn More

Nomad Ray Sidemount System Learn More

When you buy this package you will receive a FREE Regulator Bag!

 A single tank package using the dive rite xt regulators.

Learn More

Hollis DCX first stage and 200lx second stage

Learn More

Dive Rite XT Regulator Backmount Package

When you buy this package you will receive a FREE Deluxe Custom Embroidered Regulator Bag!

Learn More

Hollis S 60 LX Series Wings

Learn More

Dive Rite Nomad Ray w/DiveRite XT Regulators Learn More

Inflator Hoses Learn More

High Pressure Hoses Learn More

Inflator Hoses (Kevlar) Learn More

Regulator Hose 84" Learn More

Hollis Octo Learn More

Dive Rite Corrugated Hose Learn More

XS Scuba Regulator Cover Removal Tool Learn More

Dive Rite Hose Clip Retainer Learn More

Dive Rite Tech Buttplate Learn More

Hollis Rubber Hose Retainers Learn More

Hollis C 45 LX Series Wing Learn More

HOG Horseshoe Wings Learn More

Dive Rite Angle Adapter 70 degrees Learn More

Work of breathing at less than 1.0 J/l, the XT performs right alongside all premier regulators on the market today. Learn More

Underwater Light Dude Hose Retainer Learn More

Dive Rite Deluxe Hose Retainers Learn More

Hose Clamps for Stage Rigging Learn More

Dive Rite Stage Bottle Rigging Learn More

Cave Adventurers Sidemount Stage Rigging Learn More

XS Scuba Deluxe Cylinder Equalizer with DuoKev HP Hose Learn More

This 360 degree low pressure regulator hose adapter, that in our opinion, provides ultimate comfort to the diver. We recommend using this on all second stage regulators Learn More

Stage Hose Set Learn More

Hogarthian Hose Set Learn More

Cave Adventurers Sidemount Hose Set Learn More

Cave Adventurers Cam Bands with Hardware Learn More

PSAI Nitrox Manual Learn More

PSAI Extended Range Nitrox Manual Learn More

PSAI Sidemount Diving for the Overhead Environment Manual Learn More

PSAI DPV Diving for the Overhead Environment Manual Learn More

Dive Rite XT Sidemount Regulator Package

When you buy this package you will receive a FREE  Deluxe Custom Padded and Embroidered Regulator Bag!

Learn More

Hollis 221 DC3 Regulator Set Learn More