Includes everything you need to rig a stage bottle to ride on top in sidemount.
Comes with detailed instructions on how to position on your cylinder.
Cave Adventurers Stage Rigging
Step 1-Hold Butterfly clip in right hand with index fingers in loop. Stretch bungee around valve so that the clip is at 45 degrees between the valve knob and the back of the valve, Secure clip in position with wire tie, Install 2” quick link onto bungee anywhere that is convenient to clip your second stage.
Step 2- Place hose clamp around tank. Position hose clamp nut on opposite side of tank from clips. Then slide knot under the hose clamp from the bottom of tank so that the clip hangs down. Make sure that the clips are in line at the same 45 degrees from the knob as the other snap. Move the hose clamp up or down so it is 15 inches from the bottom of the tank before you tighten it in place.
